Cassette Care And Storage; Insert And Remove Cassettes - RCA CC4352 User Manual

Videocassettes

Insert and Remove Cassettes

STOP/
EJECT
Button
1. Attach a power source to the
camcorder.
2. Press the STOP/EJECT button.
The cassette holder opens
automatically.
3. Insert the cassette with the tape wheel

Cassette Care and Storage

• When you are finished with a cassette,
rewind it, remove it from the
camcorder, and label it.
• Store cassettes vertically in their
protective cases at normal room
temperatures. Do not leave your
camcorder or cassettes in a car or
outdoors for an extended period.
Excessive heat or cold might damage
your cassettes.
• Keep the cassette away from strong
magnetic fields such as electric motors
and other devices.
Safety Tab
Tape
Windows
Press here
to close.
facing up and tape windows facing
out. Gently push the cassette down
until it locks into place.
4. Gently close the cassette holder with
your hand.
• Keep dust from entering the cassette
compartment. All dust is abrasive and
will cause excessive wear on the tape
and the camcorder's recording or
playback heads.
• Do not use cassettes with damaged or
spliced tape.
• Do not use a cassette if it has been
damaged or exposed to moisture. The
tape might jam and/or damage your
camcorder.
• Break off the safety tab to prevent
accidental erasure of your recording.
Caution: Insert
the cassette only
one way with the
tape wheel facing
up and the tape
windows facing
out. The cassette
should slide easily
into the holder.
Gently push the
cassette down until
it locks into place.
19