RCA CC4352 User Manual page 7

First-Time Operation
2. Attaching the Adapter and Charger.
To AC 120V,
50/60 Hz
Adapter/
Charger
Since the battery must be charged before
it can be used the first time, attach the
adapter/charger to the camcorder.
1. Attach one end of the adapter/
charger's DC cable to the DC
OUTPUT jack on the side of the
adapter/charger.
3. Adjusting the Handstrap, Removing the Lens Cap,
and Attaching it to the Camcorder.
1. Open the handstrap, insert your
hand, and adjust the handstrap
to fit your hand.
4
DC
OUTPUT
Jack
DC Cable
2. Attach the other end of the cable
3. Plug the adapter/charger's plug
4. Details are on page 12.
2. Remove the lens cap and attach
DC IN 9.6V
Jack
to the DC IN 9.6V jack on the
camcorder.
into an operating outlet.
it to the handstrap as shown.
Lens Cap on
Handstrap
Handstrap