Tape Counter; Using The Memory-Stop Feature - RCA CC4352 User Manual

Recording

Tape Counter

The tape counter acts as a handy reference to help you locate tape segments.
The memory-stop feature helps locate a certain point on the tape. When the
tape counter appears, the tape stops automatically during rewind or fast
forward when the tape counter reaches 0000M.
DISPLAY
Button

Using the Memory-Stop Feature

1. Press REC/PAUSE to pause recording.
Make sure the displays appear in the
viewfinder or on the LCD monitor.
If they do not, press DISPLAY.
2. Locate the place on the tape you want
to return to, and press RESET to reset
the counter to 0000M.
Tape Counter
With Memory Stop
3. Continue to record or play the tape.
When you want to return to the place
36
CAMERA/
OFF/VCR
RESET
Switch
Button
0000M
REW/
F.FWD Button
REVIEW
Button
you marked, press the REC/PAUSE
button to stop recording or the STOP/
EJECT button to stop playback.
4. Press and hold the small red button
while you set the CAMERA/OFF/VCR
switch to VCR.
5. Press the REW/REVIEW button.
The tape rewinds to the counter
reading of 0000M.
Notes: Press DISPLAY to display or remove
the tape counter. Memory stop is turned on
whenever the tape counter appears.
The camcorder stops rewinding or fast
forwarding when the counter reaches 0000M.
To continue rewinding or fast forwarding,
press the button again.
The tape counter automatically resets to
0000M whenever a cassette is inserted.
STOP/EJECT
Button