Table of Contents
Advertisement
Recording
Digital Effects
Negative Mode
The camcorder has a negative mode that lets you turn the image negative.
1. Place the camcorder in record-pause.
Make sure the displays appear in the
viewfinder. If they do not, press
DISPLAY.
2. Repeatedly press DIGITAL EFFECTS
until NEGPOS appears.
Negative Mode
Digital Zooming
The camcorder has digital zooming that allows you to zoom in on a subject with
magnification up to 130 times. Normal zooming is up to 32 times.
1. Place the camcorder in record-pause.
Make sure the displays appear in the
viewfinder. If they do not, press
DISPLAY.
2. Repeatedly press DIGITAL EFFECTS
until ZM:2 appears. Use the zoom
buttons to zoom in and out. ZOOM
appears when you zoom above 16X.
Digital Zooming Mode
34
(continued)
3. Press REC/PAUSE to start recording.
4. To turn off negative recording, press
REC/PAUSE to pause recording, and
repeatedly press DIGITAL EFFECTS
until no digital effects display appears.
Normal Mode
3. Press REC/PAUSE to start recording.
4. To turn off digital zooming, press
REC/PAUSE to pause recording, and
repeatedly press DIGITAL EFFECTS
until no digital effects display appears.
Note: As the zoom level increases during
digital zooming, the picture will gradually
become less sharp. Use the high zoom levels
mainly for special effects.
Normal Mode
Advertisement
Table of Contents
