Attaching; Removing - RCA CC4352 User Manual

Power Your Camcorder
Use the Battery to Power Your Camcorder
BATTERY
EJECT
Button
Rechargeable
Battery
Hold Battery
Flush and
Slide Down
Attaching the Charged Battery
If the DC cable is attached to the
camcorder, remove it before attaching
the battery.
1. Align the reference arrow on the
battery to the arrow on the back of
the camcorder.
2. Hold the battery flush against the
camcorder while you slide it down in
the direction of the arrow.
ATTENTION: THE RECHARGABLE BATTERY
CONTAINED IN THIS PRODUCT IS RECYCLABLE. AT THE
END OF ITS USEFUL LIFE, UNDER VARIOUS STATE LAWS,
IT MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY IN
THE MUNICIPAL WASTE STREAM. CHECK WITH YOUR
LOCAL SOLID WASTE OFFICIALS FOR DETAILS IN YOUR
AREA FOR RECYCLING OPTIONS OR PROPER DISPOSAL.
14
CAMERA/
OFF/VCR
Switch

Attaching

Removing

3. Press and hold the small button on the
Removing the Battery
1. Set the CAMERA/OFF/VCR switch to
2. Press and hold the BATTERY EJECT
(continued)
CAMERA/OFF/VCR switch while you
set it to CAMERA.
OFF.
button while removing the battery.
Pb