Attaching The Shoulder Strap - RCA PROV700C User Manual

Recording
Attaching the Shoulder Strap
The camcorder's shoulder strap is designed to let you carry the camcorder from your
shoulder and - when you are ready to shoot - bring the camcorder to shooting position
in one quick movement.
To Attach the Shoulder Strap
.
If the strap keeper is
over a double section
of the strap, slide the
strap keeper off the
end of the strap.
Replace the keeper
on the strap between
the buckle and the
end of the strap as
shown.
4. Attach the other end of the strap to the
other shoulder strap attachment ring.
2. Loop the end of the strap over the top
of the shoulder strap attachment ring.
Buckle
I
Keeper
.
.
Adjust the shoulder strap to the desired
length.
Slide both keepers up snugly against
the shoulder strap attachment rings to
prevent the strap from slipping.
.
Rings
Thread the end of the strap back
through the keeper and buckle making
sure it is threaded under the outer
strap. Make sure the strap is not
twisted.
Cautions: When carrying the
camcorder with the shoulder strap,
close and lock the LCD monitor and
rotate the viewfinder down and slide
it to the front. This helps prevent
possible damage from bumping
against your body as you move.
Make sure the shoulder strap is
firmly attached before using it to
carry the camcorder.
46