Table of Contents
Advertisement
2.
Attaching
the Adapter
and Charger.
To AC
50/60 Hz
Adapter/
Charger
OUTPUT
Jack
Since the battery must be charged before
it can be used the first time, attach the
adapter/charger
to the camcorder.
1. Attach one end of the adapter/
charger's
DC cable to the DC
OUTPUT
jack on the side of the
adapter/charger.
DC IN 9.6V
Jack
2. Attach the other end of the cable
to the DC IN 9.6V jack on the
camcorder.
3. Plug the adapter/charger's
plug
into an operating
outlet.
4. Details
are on page 12.
3.
Adjusting
the Handstrap,
Removing
the Lens Cap,
and Attaching
it to the Camcorder.
on
Handstrap
andstrap
1. Open the handstrap,
insert your
hand, and adjust the handstrap
to fit your hand.
2. Remove the lens cap and attach
it to the handstrap
as shown.
Advertisement
Table of Contents
