Table of Contents
Advertisement
Included Accessories
Built-In Color Enhancement Light
The built-in color enhancement light automatically adds light when
needed. To operate the video light, press and hold the small button on the
CAMERA/OFF/VCR switch while you set it to CAMERA.
Video
Light
To Use the Light
Set the LIGHT AUTO/OFF/ON switch.
•
To turn the light on, set the switch
to ON.
•
If you want the light to come on
automatically when the camcorder
senses there is insufficient light, set
the switch to AUTO.
Notes: For the light to operate in AUTO,
you must have a tape in the camcorder.
If the lighting condition is unstable, the
light may turn on and off. Set the light to
ON or OFF.
•
To turn the light off, set the switch to
OFF. To save battery power, turn the
light off when you are not recording.
Notes: When the light is turned on, the
camcorder may turn off if the battery's power
is low even though the battery level indicator
is not flashing.
Avoid bumping or shaking the light when in
use. The light's bulb is sensitive when hot and
might burn out.
12
CAMERA/OFF/VCR Switch
LIGHT AUTO/OFF/ON Switch
Cautions:
Do not operate the video light closer
than one foot to people or other objects.
The video light and front surface
become very hot. Do not touch them
during operation or right after use.
Serious injury might result.
To prevent overheating, do not block or
cover the ventilation holes on the color
enhancement light.
Do not place the camcorder in a
carrying case right after using the light.
Never operate the video light close to
flammable or explosive material.
Do not allow water to drop on the light
when in operation.
Advertisement
Table of Contents
