Table of Contents
Advertisement
Date and Time Display
Record the Time and Date, AUTO Date, Auto TITLE, or Date
The time and date, AUTO date, auto TITLE, date only, or no date can be recorded on
your tape. Whenever one of these displays appears, it will be recorded.
Date and Time Display
No Display
To Select the Display to Record
1. Repeatedly press DATE/TIME to
select the display you want to record.
• Date and Time Display: The date
and time will be displayed and
recorded.
•
AUTO Date: The date is
automatically recorded for approxi-
mately 10 seconds at the beginning
of the recording.
Charge the Built-in Clock Battery
The camcorder has a built-in rechargeable battery that must be charged
approximately every two months.
1. Attach a power supply and set the
CAMERA/OFF/VCR switch to OFF.
2. Leave the power supply attached at
least 24 hours.
Viewfinder Displays
Repeatedly Press DATE/TIME Button
10:25AM
11/18/1998
Date Display
AUTO Date Display
Auto TITLE Display
11/18/1998
•
TITLE: The date and title you
have created are displayed and
recorded for approximately 10
seconds at the beginning of the
recording.
• Date Display: The date is dis-
played and recorded.
• No Display: No display is dis-
played or recorded.
Cautions: If this battery is not charged every
two months, it will over-discharge and shorten its
useful life.
Do not attempt to replace this battery. Take the
camcorder to an authorized RCA Service Center.
AUTO
11/18/1998
TITLE
11/18/1998
23
Advertisement
Table of Contents
