Table of Contents
Advertisement
When you have installed the hob, make sure that
The power supply cable is not accessible through cupboard doors or drawers.
•
•
There is adequate flow of air from outside the cabinetry to the base of the hob.
If the hob is installed above a drawer or cupboard space, a thermal protection barrier
•
is installed below the base of the hob.
•
The isolating switch is easily accessible by the customer.
Before locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply
force onto the controls protruding from the hob.
Locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do not
•
apply force onto the controls protruding from the hob.
Fix the hob on the work surface by screw four brackets on the bottom of hob (see
•
picture) after installation.
Adjust the bracket position to suit for different work surface's thickness.
•
21
Advertisement
Table of Contents
