Table of Contents
Advertisement
v Set the date and time
v Set passwords and security settings
Complete the following steps to start the Configuration/Setup Utility program:
1. Turn on the server.
2. When the message Press F1 for Configuration/Setup appears, press F1. If
3. Follow the instructions on the screen.
Installing and using the baseboard management controller utility
programs
The baseboard management controller provides environmental monitoring for the
server. If environmental conditions exceed thresholds or if system components fail,
the baseboard management controller lights LEDs to help you diagnose the
problem and also records the error in the BMC system event log.
The baseboard management controller also provides the following remote server
management capabilities through the OSA SMBridge management utility program:
v Command-line interface (IPMI Shell)
v Serial over LAN
See the User's Guide on the IBM Documentation CD for details.
For more information about IPMI 2.0, see the Intelligent Platform Management
Interface Specification (IPMI Specification), version 2.0, available at
http://www.intel.com.
Using the baseboard management controller utility programs
Use the baseboard management controller utility programs to configure the
baseboard management controller, download firmware updates, and remotely
manage a network.
Using the baseboard management controller configuration utility
program
Use the baseboard management controller configuration utility program to view or
change the baseboard management controller configuration settings. You can also
use the utility program to save the configuration to a file for use on multiple servers.
Go to http://www.ibm.com/support/ to download the utility program; then, copy the
bmc_cfg.exe file to a configuration utility diskette on a USB diskette drive.
34
IBM System x3800 Type 8865: Installation Guide
an administrator password has been set, you must type the administrator
password to access the full Configuration/Setup Utility menu.
The command-line interface provides direct access to server management
functions through the IPMI 2.0 protocol. Use the command-line interface to issue
commands to control the server power, view system information, and identify the
server. You can also save one or more commands as a text file and run the file
as a script.
Establish a Serial over LAN (SOL) connection to manage servers from a remote
location. You can remotely view and change the BIOS settings, restart the server,
identify the server, and perform other management functions. Any standard Telnet
client application can access the SOL connection.
Advertisement
Table of Contents
