Samson TROVIS SAFE 3731-3 Mounting And Operating Instructions page 78

Parameter – Display, values
Code
no. [default setting]
Note: Codes with marked with an asterisk (*) must be enabled with Code 3 prior to configuration.
47* Write protection HART
[No] · YES
ESC
Diagnostics (refer to EB 8389S on EXPERTplus Valve Diagnostics)
48*
49*
Note: The error codes listed in following appear in the display corresponding to their status
classification set over the condensed state (Maintenance required/Maintenance demanded:
, Out of specification:
to the error code as the status classification, the error is not included in the condensed state.
A status classification is assigned to every error code in the default setting. The status classifi-
cation of error codes can also be changed as required using an operating software (e.g.
TROVIS-VIEW).
Description
When the write protection function is activated, device data can
only be read, but not overwritten over HART
blinking, Maintenance alarm:
®
communication.
). If "No message" is assigned
EB 8387-3S EN
Code list
78