Samson TROVIS SAFE 3731-3 Mounting And Operating Instructions page 55

Turn until the OPEN position of the valve
is reached.
Press to confirm the OPEN position.
Enable configuration:
Note: If no settings are entered within
120 seconds, the enabled configuration
function becomes invalid.
→ Code 3, display: No
Turn
Press , Code 3 blinks.
→ YES
Turn
Press , display:
Enter pin position:
mm
→ Code 4
Turn
Press , Code 4 blinks.
→ Pin position on lever (see rele-
Turn
vant section on attachment).
Press
Configuration enabled
Default: No
Pin position
Default: No
Select initialization mode:
→ Code 6
Turn
Press , Code 6 blinks.
→ MAN
Turn
Press to confirm the MAN initialization
mode.
Start initialization:
→ Code 0
Turn
Press , Code 0 blinks.
→ Init
Turn
Press . The setting of the fail-safe position
AtO or AtC appears.
Keep pressed down for 6 seconds.
Initialization starts after the progress indica-
tion has stopped.
Start-up – Settings
Initialization mode
Default: MAX
Initialization
Fail-safe position setting
Progress indicated until
initialization starts
EB 8387-3S EN
55