Main Menu Options; Startup/Auto Run Mode; Dmx-512 Mode; Sound Options - SHOWTEC Airstrike V2 Manual

Airstrike

Main Menu Options

DMX-512 mode

Sound options

Master/Slave mode
Display options
Sound-controlled mode
Reset
Manual mode

1. Startup/Auto run mode

01) Upon startup, the display will show the current operation mode, for example
02) Meanwhile, the device will perform its automatic show.
03) Press the MENU button to enter the main menu.
2. DMX-512 mode
With this menu you can set the DMX starting address.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to set the desired DMX starting address. The adjustment range is
between
3. Sound options
With this menu you can set the device's behavior, while in Sound-controlled mode.
01) Press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to select one of the 3 functions:
04) Press the ENTER button to confirm your choice.
05) If the Sound-controlled mode is switched ON (see page 14), the device will perform one of the 3
actions described above.
Ordercode: 43158
.
If there is no music, the device will run a built-in program.
If there is no music, the device will black out.
If there is no music, the device will return to the previously active
mode.
14
.
.
.