Figure 14 Identifier Descriptor; Table 12 Identifier Descriptor Field Descriptions - Quantum SuperLoader DLT User Manual

Figure 14 Identifier
Descriptor
Bit
Byte 7
0
Reserved
1
2
3
4 - n
Table 12 Identifier
Descriptor Field
Descriptions
There are three different Identification Descriptors returned, in
numerical order of the Identifier Type. Each Identification
Descriptor takes the following form:
6 5
Reserved
Association
Identifier Length (n-3)
Field Name
Code Set
Association
Identifier Type
Quantum ATL SuperLoader Software Interface Guide
Chapter 3 Media Changer Commands
4 3
Reserved
Identifier
Field Description
Indicates the type of data to be found in the
Identifier field. A value of 1 indicates binary data. A
value of 2 indicates ASCII data.
Indicates whether the Identifier is associated with
the logical unit or the port. Always contains a 0,
indicating the Identifier is associated with the
logical unit.
Type of identifier.
Inquiry Command (12h)
2 1
Code Set
Identifier Type
0
41