Figure 38 Mode Select; Table 30 Mode Select Parameter Block - Quantum SuperLoader DLT User Manual

Chapter 3 Media Changer Commands
Mode Select (6) / (10) Command (15h / 55h)
Table 30 Mode
Select Parameter
Block
Figure 38 Mode
Select Page
Descriptor
Bit
Byte 7
PS (0)
0
1
2 - n
72
Field Name Description
Number of This field is sent as 0. It is not applicable to media
Blocks changer devices.
Block Length This field is sent as 0. It is not applicable to media
changer devices.
Mode Page Descriptors
Following the MODE SELECT command's Mode Parameter Block
Descriptor are the MODE SELECT pages, each of which sets a
different device parameter. Each mode page has a 2-byte header
that identifies the page code and indicates the number of bytes in
that page.
6 5
0
Additional Page Length
Page-Defined or Vendor Specific Parameter List
Quantum ATL SuperLoader Software Interface Guide
4 3
Page Code
2 1
3
0