Media Changer Command Descriptions - Quantum SuperLoader DLT User Manual

Command
Read Element Status Command (B8h)
Release Element (10) Command (57h)
Release Unit (6) Command (17h)
Report Device Identifier Command (A3h)
Report LUNS Command (A0h)
Request Sense Command (03h)
Reserve Element (10) Command (56h)
Reserve Element (6) Command (16h)
Send Diagnostic Command (1Dh)
Set Device Identifier Command (A4h)
Test Unit Ready Command (00h)
Write Buffer Command (3Bh)

Media Changer Command Descriptions

on page 126
on page 140
on page 143
on page 145
on page 148
on page 151
on page 160 (SCSI-3)
on page 163
on page 166
on page 168 (SCSI-3)
on page 170
on page 171
The Media Changer commands are presented in alphabetical
order. Because information about a particular command may span
multiple pages, the command name is repeated, at the top of every
page that concerns that command.
Throughout this manual, multiple bytes that contain information
about specific command parameters are portrayed as shown in the
example of the Parameter List Length field (bytes 7 and 8) of the
MODE SELECT command shown as follows:
Quantum ATL SuperLoader Software Interface Guide
Chapter 3 Media Changer Commands
Media Changer Command Descriptions
Operation Code
B8h
57h
17h
A3h
A0h
03h
56h
16h
1Dh
A4h
00h
3Bh
3
29