Tapealert Page (1Ch); Figure 44 Tapealert Page Format Descriptor; Table 34 Mode Sense - Quantum SuperLoader DLT User Manual

Table 34 Mode
Sense Page
Descriptor
TapeAlert Page
3
(1Ch)
Figure 44 TapeAlert
Page Format
Descriptor
Bit
Byte 7
PS (0)
0
1
Perf
2
3
Field Name
PS
Additional Page
Length
LTO only: The SuperLoader supports the TapeAlert Page that is
used to set/change the supported TapeAlert configuration
options. Use the MODE SENSE command to read the settings of
the TapeAlert page.
6 5
0
Additional Page Length (0Ah)
Reserved
Reserved
Quantum ATL SuperLoader Software Interface Guide
Chapter 3 Media Changer Commands
Mode Sense (6) / (10) Command (1Ah/ 5Ah)
Description
Parameters Savable. When 0, the supported
parameters cannot be saved (savable pages are not
supported). When set to 1, it indicates that the page
can be saved in nonvolatile memory by the media
changer.
This field indicates the number of bytes in the page.
Note that this value does not include bytes 0 and 1.
The length is returned on MODE SENSE and must
subsequently be set to the same value when
performing MODE SELECT.
4 3
Page Code (1Ch)
DExcpt
2 1
Test Rsvd
MRIE
0
LogErr
79