Table 26 Device
Status Log Sense
(0001h)
Field Name
Description
Temperature
These two bits indicate the temperature of the device. This field follows the
following format:
Bit 3
0
0
1
1
Status
These two bits indicate the overall condition of the device. The status of the
device follows the following format:
Bit 1
0
0
1
1
Bit 2
0
1
0
1
Bit 0
0
1
0
1
Quantum ATL SuperLoader Software Interface Guide
Chapter 3 Media Changer Commands
Description
Not supported
OK
Warning: Safe temperature exceeded.
Maximum temperature exceeded.
Description
Not supported
OK
Degraded
Failed
Log Sense Command (4Dh)
65