Unloading A Data Cartridge; Figure 35 Loading A Dlttape Vs1 Data Cartridge - Quantum SDLT 600 User Manual

Figure 35 Loading a DLTtape
VS1 Data Cartridge

Unloading a Data Cartridge

SDLT 600 Product Manual
Data Cartridge
Complete this subsection to unload a data cartridge; see
needed.
Caution:
1 Press the
command); the tape drive completes any active writing of data to the
media. The Drive Status LED flashes as the media rewinds.
When the media is finished rewinding, the tape drive ejects the data
cartridge and the Drive Status LED lights steadily.
2 Remove the data cartridge from the tape drive and return the data
cartridge to its plastic case to protect the data cartridge from damage.
Tape Drive
Drive Status LED
Remove the data cartridge from the tape drive BEFORE
turning off host power. Failure to remove a data cartridge
may result in data cartridge or tape drive damage.
Do NOT rush removal of the data cartridge: premature
removal can cause tape leader failure. Wait until the tape
drive ejects the data cartridge and the Drive Status LED
lights steadily before removing the data cartridge.
button (or issue an appropriate system software
Eject
Unloading a Data Cartridge
Eject Button
figure 35 as
2
114