Unloading A Data Cartridge; Figure 8 Loading A Super Dlttape Ii Data Cartridge - Quantum Tape Drive A-Series User Manual

Figure 8 Loading a Super
DLTtape II Data Cartridge
Unloading a Data
Cartridge
Quantum A-Series Tape Drives User's Guide
Data Cartridge
Follow these steps to unload a data cartridge:
3
1 Press the
Eject
command). The tape drive completes any active writing of data to the
media, then rewinds. The
rewinds.
When the media is finished rewinding, the tape drive ejects the data
cartridge and the
Note: A tape cartridge can be unloaded during an active FTP
session only by using the built-in FTP client. Right-click
within the right pane of the FTP client window to display
the
Caution:
2 Remove the data cartridge from the tape drive and return the data
cartridge to its plastic case to protect it from damage.
Tape Drive
Drive Status LED
button (or issue an appropriate system software
Drive Status
LED lights steadily.
Drive Status
menu, then click
Contextual
Eject the data cartridge from the tape drive before
turning off host power. Failure to remove a data
cartridge may result in data cartridge or tape drive
damage.
Chapter 3 Using Your Tape Drive
A-Series Data Cartridges
Eject Button
LED flashes as the media
.
Eject tape
21