Loading a Data Cartridge
Figure 27 Loading a Super
DLTtape II Data Cartridge
SDLT 600 Product Manual
Complete this subsection to load a data cartridge into the front of the tape
drive; see
1 Insert the data cartridge into the front of the tape drive, as shown in
figure
2 Push the data cartridge fully into the tape drive.
The Drive Status LED flashes to show that the media is loading.
When the media reaches the Beginning of Tape (BOT) marker, the
LED lights steadily. The data cartridge is now ready for use.
Data Cartridge
figure 27
as needed.
27.
Tape Drive
Drive Status LED
Loading a Data Cartridge
Eject Button
102
1