Quantum PX506 Unpacking And Installation Instructions page 39

Installing the Libraries
Configuring the Libraries
in a Multiple Stack
Quantum PX506 and PX510 Unpacking and Installation Instructions
Refer to Installing the Library
0
library chassis into the rack. The libraries must be stacked without space
between units.
The libraries initialize by default in a "Stand Alone" configuration. The
libraries must be set to either a "Master" or "Slave" configuration through the
0
OCP so the libraries recognize the other units in the stack.
To configure the libraries in a multiple stack:
1 Select one of the libraries in the stack to be the "Master" library. This
library can occupy any position in the stack.
2 Refer to Setting the Library Options
the library's stack role.
Installing Additional Libraries
Document 81-81338-01 D01
on page 15 for information on installing the
on page 33 for information on setting
June 2005
39