Quantum PX506 Unpacking And Installation Instructions page 33

Figure 27 Setup Screen
Figure 28 Library Options
Screen
Quantum PX506 and PX510 Unpacking and Installation Instructions
Setting the Library Options
To set the library options:
1 Press from the
Setup
(see figure 27):
2 From the screen, use the up and down arrows to highlight
Setup
and press .
Enter
The screen displays (see
Cabinet
3 The screen allows you to configure the library as a "Master" or
Stack role
"Slave" in a multiple library stack. The library is configured "Stand
alone" by default. If this is a multiple library stack, use the up and down
arrows to highlight
following information about the library:
Installing the Library
screen. The OCP displays the
Home
Enter
figure 28):
and press
Stack role Enter
Document 81-81338-01 D01
June 2005
screen
Setup
Cabinet
and the OCP displays the
0
33