Quantum PX506 Unpacking And Installation Instructions page 20

Quantum PX506 and PX510 Unpacking and Installation Instructions
Document 81-81338-01 D01
June 2005
20
Qty Figure
2
sets
2
sets
Installing the Rack Mount Shelves
1 Assemble the rack mount shelves by (see
The rack mount shelf orientation differs between the right and left
Note:
shelves to allow the FlexLink system to operate.
Loosely attach the adjustable shelves (right and left) with 4 M5 x 10
a
Allen screws and T-nuts.
T-Nuts must be oriented so they fit in the grooves of the
Note:
shelves.
Attach the appropriate rail adapter to the front and back of the rack
b
mount shelves (right and left) with 4 M5 x 10 Allen screws (each rail
adapter is marked with the specific hole type supported, either metric
or standard). The rail adapters have arrows indicating the proper
orientation (see
Installing the Library
Description
Back bracket hardware (M5 x 8 allen screws
and mounting plate)
Back clamp hardware (M5 x 10 and back
clamp)
figure
figure 12).
13):
0