Changing The Transfer Mode; Figure 41 Govault Properties Dialog - Quantum GoVault 40GB User Manual

Changing the Transfer Mode

Figure 41 GoVault Properties
Dialog
GoVault™ for Windows User's Guide
Appendix B Configuring Windows for DMA Data Transfer Mode
to the system by an Intel or an Intel-compliant motherboard with
either an Intel or an Intel-compliant ICH5, ICH6, or ICH7 I/O
Controller Hub. In this case, PIO is configured as the data transfer
mode, and you should use the procedure in
Mode to configure high-speed DMA mode for your GoVault data
transfer operations. Do not close the
If the procedure in Determining Your Motherboard Configuration
indicated that PIO is the GoVault data transfer mode, change it to DMA
mode as follows:
1 Right-click
QUANTUM GoVault
select
Properties
(see figure 41).
Device Manager
in the
Device Manager
to display the
QUANTUM GoVault Properties
Changing the Transfer Mode
Changing the Transfer
window.
window and
dialog
69