Table of Contents
Advertisement
GoVault™ for Windows User's Guide
2 Press and hold the front panel cartridge eject button for a second or
longer, and watch the activity LED to confirm that the cartridge eject
operation is underway:
This LED indication . . .
continuous fast flashing
five flashes and then stop
3 Remove the cartridge from the dock after the eject operation
completes and store it in its protective case.
Software Cartridge Eject Procedure
Use Windows to perform the cartridge eject function as follows:
1 Verify that the font panel activity LED indicator is not flashing, which
would signify that the cartridge is being accessed.
Ejecting the cartridge while it is being accessed can
Caution:
result in a loss of data.
2 Right-click the GoVault icon in either Windows
window to display the GoVault menu (see figure 14 on
Computer
page 30).
3 Click
to eject the cartridge.
Eject
4 Remove the cartridge from the dock after the eject operation
completes and store it in its protective case.
Chapter 3 Operation
Inserting and Ejecting Cartridges
Signifies . . .
a normal cartridge eject operation,
which can take up to ten seconds to
complete.
that either the backup application
software or the operating system
inhibited the cartridge eject operation.
In this case, see
Software Cartridge
Eject Procedure
in the following
subsection, or refer to the
documentation for your backup
application software.
Explorer
3
or the
My
28
Advertisement
Table of Contents
