Figure 26 Removing Cartridge
Password Protection
Performing a Security
Erase Cartridge Function
GoVault™ for Windows User's Guide
7 As prompted, type the new cartridge password in the
text box.
8 Type the password again in the
9 Click
to assign the new password to the GoVault cartridge and
OK
close the
Change Cartridge Password
To remove password protection from a cartridge:
1 Insert, or eject and reinsert the password-protected cartridge to
redisplay the
page 39).
2 As prompted, type the cartridge password in the
3 Select the
Change Password
4 Click
to display the
OK
figure
25).
5 Select the
Remove password protection
6 Verify that the
both blank.
7 Click
to remove password protection from the cartridge and close
OK
the
Change Cartridge Password
The Security Erase Cartridge function erases all of the data on a cartridge.
3
Then, after completing the Security Erase Cartridge function, you will
have to reformat the cartridge. This is the only way to reuse a password-
protected cartridge if the password has been forgotten or lost.
The Security Erase Cartridge function only restores the
Note:
cartridge for reuse. There is no recovery function for the data
on a password-protected cartridge with a forgotten or lost
password.
Confirm Password
Enter Cartridge Password
checkbox.
Change Cartridge Password
and
New Password
Confirm Password
dialog.
Chapter 3 Operation
Using Cartridge Password Protection
New Password
text box.
dialog.
dialog (see
figure 23
Password
dialog (see
checkbox.
text boxes are
on
text box.
42