Determining Which System Application Applet To Use; Installing The Govault System Application Software - Quantum GoVault 40GB User Manual

Determining Which
System Application
Applet to Use
Installing the GoVault
System Application
Software
GoVault™ for Windows User's Guide
To install the GoVault system application software:
1 First, you need to determine which system application applet to use.
2 Then, see

Installing the GoVault System Application Software

detailed software installation instructions.
To find out which system application applet you need to use:
1 From the
Start
2
2 Select
Properties.
3 On the
General
.
Edition
IF . . .
you see
x64 Edition
you do not see
the system is a 64-bit Itanium,
After determining which system application applet you need to use,
install the GoVault system application software on your workstation or
2
server system as follows:
1 Insert the GoVault Resource CD into the CD-ROM drive.
2 Browse the CD contents to find the
appropriate system application applet.
3 Double-click the
Wizard (see
4 Click
Next
figure 12).
Installing the GoVault System Application Software
menu on your PC, right click
tab, under the
System
,
,
x64 Edition
SetupGoVault.msi
figure 11).
to continue and display the
Chapter 2 Installation Procedures
My Computer.
heading, look for the words
THEN use the . . .
system application applet
x64
x86
IA64
file for the
SetupGoVault.msi
file to launch the GoVault Setup
License Agreement
for the
x64
dialog (see
17