Chapter 1 Installing the ValueLoader
Installing the ValueLoader into a Rack
Figure 5 Installing
Mounting Brackets
(Left Side Shown)
10
ValueLoader DLT VS80/DLT VS160 Tape Autoloader User Manual
3 Using the screws and clip nuts from the rackmount hardware
package, secure one rail to each side of the rack in the location in
which you plan to install the ValueLoader.
•
Be sure to secure both the front and back of each rail to the rack.
The rails extend to fit a variety of rack depths.
•
The correct orientation of the left rail is shown in
for the right rail.
figure
6. Repeat