Advertisement
Quick Links
Product End-of-Life Disassembly Instructions
Product Category: Personal Computers
Marketing Name / Model
[List multiple models if applicable.]
HP EliteDesk 880 G2 TWR Business PC
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
Batteries
Mercury-containing components
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Cathode Ray Tubes (CRT)
Capacitors / condensers (Containing PCB/PCT)
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
External electrical cables and cords
Gas Discharge Lamps
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
Components and parts containing toner and ink,
EL-MF877-00
Template Revision B
Notes
With a surface greater than 10 sq cm
All types including standard alkaline and lithium coin
or button style batteries
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
Includes background illuminated displays with gas
discharge lamps
Acbel 400W EPA92(C4,C49,C50)
Power cord
Include the cartridges, print heads, tubes, vent
PSG instructions for this template are available at
EL-MF877-01
Quantity
of items
included
in product
2
1
3
1
Page 1
Advertisement
Related Manuals for HP EliteDesk 880 G2
Summary of Contents for HP EliteDesk 880 G2
- Page 1 Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
- Page 2 including liquids, semi-liquids (gel/paste) and toner chambers, and service stations. Components and waste containing asbestos Components, parts and materials containing refractory ceramic fibers Components, parts and materials containing radioactive substances 2.0 Tools Required List the type and size of the tools that would typically be used to disassemble the product to a point where components and materials requiring selective treatment can be removed.
- Page 3 Figure 1 Remove the side panel: Figure 2 Disconnect the cables from the board Figure 3 Disconnect PSU cables from the board Figure 4 Disconnect the cables from the ODD Figure 5 Disconnect the cables from the HDD Figure 6 Remove the HDD from cage EL-MF877-00 Page 3 Template Revision B...
- Page 4 Figure 7 Take the CPU Power cable out of the Figure 8 Take the cables out of the hooks. hooks. Figure 9 Loose the screws from PSU Figure 10 Press the baffle and slide the PSU Figure 11 Remove PSU. Figure 12 Loose the screws from system fan EL-MF877-00 Page 4...
- Page 5 Figure 13 Remove system fan Figure 14 Release the clip. Figure 15 Remove the Memory card from the board Figure16 Loose the screws and remove HeatSink. Figure 17 Rotate the handle and open it up Figure 18 Remove the CPU from the board EL-MF877-00 Page 5 Template Revision B...
- Page 6 Figure 20 Loose the screws from board Figure 19 Remove the battery from the system board Figure 21 Remove M/B from chassis Figure 22 Release the hooks and remove front panel. Figure 23 Release slim ODD latch. Figure 24 Remove slim ODD from chassis EL-MF877-00 Page 6 Template Revision B...
- Page 7 Figure 25 Loose the screws. Figure 26 Remove Front I/O cable. Figure 27 Release the hook. Figure 28 Remove power LED cable. Figure 29 Loose the screws of speaker. Figure 30 Remove speaker EL-MF877-00 Page 7 Template Revision B PSG instructions for this template are available at EL-MF877-01...
- Page 8 Figure 31 Release the hooks and slide it towards left. Figure 32 Remove HDD latch from chassis. Figure 33 Release the metal sheet structure. Figure 34 Remove 5.25'' bay's latch Figure 35 Release the slim ODD latch from slim Figure 36 Remove slim ODD latch from slim ODD. ODD.
- Page 9 Figure 37 Release the screw. （Acbel 400W Figure 38 Slid cover to the left. EPA92） Figure 39 Release scew of Fan and remove the fan Figure 40 Release scew of Inlet and remove the Inlet from case from case. EL-MF877-00 Page 9 Template Revision B PSG instructions for this template are available at...
- Page 10 Figure 41 Remove the thin-film plastic sheet. Figure 42 Unscrew and remove PCB from case. Figure 43 Remove bulk cap(electrolytic capacitor) from PCB. EL-MF877-00 Page 10 Template Revision B PSG instructions for this template are available at EL-MF877-01...