Table 2: Supported Operational Commands - Quantum ACL 4/52 Supplementary Manual

ACL 4/52 Software Interface Guide
Document 6211225-03
Version 3.0
Note
Table 2: Supported
Operational Commands
3-8
This section describes the commands, command format and data
format. For the most part, these formats are taken directly from the
SCSI-2 Specification. Only the fields and values supported by the ACL
4/52 are described in this guide. The commands, their operation code
and type are shown in Table 2.
Command Name
Initialize Element Status
Initialize Element Status with Range
Inquiry
Log Sense
Mode Select
Mode Sense
Move Medium
Position to Element
Medium Removal
Prevent/Allow
Read Element Status
Ready Inport
Release
Request Sense
Request Volume Element Address
Reserve
Rezero Unit
Send Diagnostic
Send Volume Tag
Test Unit Ready
Operation Code
07h Optional
E7h Vendor
12h Mandatory
4Dh Optional
15h Optional
1Ah Optional
A5h Mandatory
2Bh Optional
1Eh Optional
B8h Optional
DEh Vendor
17h Optional
03h Mandatory
B5h Optional
16h Optional
01h Optional
1Dh Mandatory
B6h Optional
00h Mandatory
Type
SCSI Interface