Glossary - Quantum ACL 4/52 Supplementary Manual

Glossary

ACL 4/52 library
actuators
automated tape library
bar code label
bar code scanner
calibration
control panel
DLT™
extension axis assembly
extension axis belt
FCC Class A
FSE
gripper assembly
horizontal belt
host
host computer
LCD
Glossary
The automated storage and retrieval component of an automated tape
library system used for storing and handling DLT™ cartridges.
Robotic components that move inside the library to manipulate
cartridges. These include the gripper, extension axis, vertical and
horizontal axes.
A robotic storage and retrieval system for DLT™ cartridges.
The identification label on DLT™ cartridges.
A device that is mounted on the extension axis that reads the cartridge
bar code labels.
The software measurements and configuration required for successful
operation of the library.
The panel on the front of the library that contains the Status Display
Area, as well as indicators and control switches.
Digital Linear Tape (cartridge)
The assembly that mounts on top of the vertical carriage, contains the
gripper assembly and the bar code reader.
The drive belt connecting the extension motor/gearbox to the gripper.
Standard established by the U.S. Federal Communications
Commission governing electromagnetic emissions.
Field Service Engineer
The assembly that mounts on the extension axis and grips cartridges;
referred to as the gripper.
The drive belt connecting the horizontal motor to the horizontal axis
assembly.
Host Computer
The computer that issues SCSI commands to control the library
robotics.
Liquid Crystal Display
ACL 4/52 Software Interface Guide
Document 6211225-03
Version 3.0
G-1