Table of Contents
Advertisement
9. Follow the procedure in
Display cover and antenna assembly
Replacement of the display cover and antenna assembly
Prerequisites
NOTE:
This procedure is applicable for systems shipped with a plastic chassis only.
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
wireless
card.
5. Remove the
display
assembly.
6. Remove the
hinge
caps.
7. Remove the
display
bezel.
8. Remove the hinges.
9. Remove the
display
panel.
10. Remove the
camera
module.
11. Remove the
eDP
cable.
NOTE:
The display cover and antenna assembly cannot be further disassembled. If the WLAN antennas are malfunctioning
and needs replacement, replace the entire display cover and antenna assembly.
About this task
The following image indicates the location of the display cover and antenna assembly and provides a visual representation of the
removal procedure.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
89
Advertisement
Table of Contents
