5. Install the
SD
card.
6. Follow the procedure in
Hinges
Removing the hinges
Prerequisites
NOTE:
This procedure is applicable for systems with a plastic chassis only.
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
wireless
card.
5. Remove the
display
assembly.
6. Remove the
hinge
caps.
7. Remove the
display
bezel.
About this task
The following images indicate the location of the hinge caps and provide a visual representation of the installation procedure.
74
Removing and installing components
After working inside your
Before working inside your
computer.
computer.