Steps
1. Align the notch on the memory module with the tab on the memory-module slot on the system board.
2. Slide the memory module into the memory-module slot on the system board.
3. Press down on the memory module until the securing clips click, locking the memory module in place.
NOTE:
Repeat steps 1 to 3 if there is a second memory module to be installed into your computer.
Next steps
1. Install the
base
cover.
2. Install the
SD
card.
3. Follow the procedure in
Speakers
Removing the speakers
Prerequisites
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
48
Removing and installing components
After working inside your
Before working inside your
computer.
computer.