Table of Contents
Advertisement
5. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
NOTE:
Ensure to route the speaker cable over the WLAN antenna cables.
6. Connect the display cable to the connector on the system board.
Next steps
1. Install the
wireless
card.
2. Install the
base
cover.
3. Install the
SD
card.
4. Follow the procedure in
Hinge caps
Removing the hinge caps
Prerequisites
NOTE:
This procedure is applicable for systems with plastic chassis.
1. Follow the procedure in
2. Remove the
SD
card.
3. Remove the
base
cover.
4. Remove the
wireless
card.
5. Remove the
display
assembly.
About this task
The following images indicate the location of the hinge caps and provide a visual representation of the installation procedure.
68
Removing and installing components
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
