Table of Contents
Advertisement
•
The display shows a check mark beside the DND icon.
•
The LED displays a blinking green light and amber light periodically.
If DND is off, the following occurs:
•
Voice Announcement sounds Do Not Disturb Off.
•
The display shows an "X" mark beside the DND icon.
12.2
Turning Voice Announcement On or Off
NOTE: Depending on the configuration of your radio, press or press and hold the Menu/
Programmable button to directly access the feature. Else, manually enter the feature with the
following procedure.
Procedure:
1 Press the Menu/Programmable button.
2 Locate the Voice Announcement icon.
3 To turn on Voice Announcement, press the Volume Up button. To turn off, press the Volume
Down button.
If Voice Announcement is on, the following occurs:
•
Voice Announcement sounds Voice Announcement On.
•
The display shows a check mark beside the Voice Announcement icon.
•
All Voice Announcement tones are turned on.
If Voice Announcement is off, the following occurs:
•
Voice Announcement sounds Voice Announcement Off.
•
The display shows an "X" mark beside the Voice Announcement icon.
•
All Voice Announcement tones are turned off.
12.3
Turning Radio Alert Tones On or Off
NOTE: Depending on the configuration of your radio, press or press and hold the Menu/
Programmable button to directly access the feature. Else, manually enter the feature with the
following procedure.
Procedure:
1 Press the Menu/Programmable button.
2 Locate the Alert Tones icon.
3 To turn on Alert Tones, press the Volume Up button. To turn off, press the Volume Down
button.
If Alert Tones is on, the following occurs:
•
Voice announcement sounds All Alert Tones On.
•
The display shows a check mark beside the Alert Tones icon.
•
All tones and alerts are turned on.
If Alert Tones is off, the following occurs:
MN005173A01-AD
Chapter 12 : Menu
33
Advertisement
Table of Contents
