Adjust The Camera View (Ptz); View And Record Video - Axis Q6315-LE User Manual

AXIS Q6315-LE PTZ Camera
Configure your device
3. Click

Adjust the camera view (PTZ)

To learn more about different pan, tilt, and zoom settings, see Pan, tilt, and zoom (PTZ) on page 49.
1. Go to PTZ > Limits.
2. Set the limits as needed.
Create a recorded guard tour
1. Go to PTZ > Guard tours.
2. Click
3. Select Recorded and click Create.
4. Enter a name for the guard tour and specify the pause length between each tour.
5. Click Start recording tour to start recording the pan/tilt/zoom movements.
6. When you're satisfied, click Stop recording tour.
7. Click Done.
8. To schedule the guard tour, go to System > Events.

View and record video

This section includes instructions about configuring your device. To learn more about how streaming and storage works, go to
Streaming and storage on page 50.
Reduce bandwidth and storage
Important
Reducing the bandwidth can result in loss of details in the image.
1. Go to Video > Stream.
2. Click
3. Select Video format H.264.
4. Go to Video > Stream > General and increase Compression.
5. Go to Video > Stream > Zipstream and do one or more of the following:
- Select the ZipstreamStrength that you want to use.
Note
The Zipstream settings are used for both H.264 and H.265.
- Turn on Dynamic FPS.
- Turn on Dynamic GOP and set a high Upper limit GOP length value.
Add preset position to create a new preset position.
Guard tour.
in the live view.
9