Video - Axis Q6315-LE User Manual

AXIS Q6315-LE PTZ Camera
The device interface
Shows what kinds of access to the device that are active, and what encryption protocols are in use. Recommendations to the
settings are based on the AXIS OS Hardening Guide.
Hardening guide: Click to go to AXIS OS Hardening guide where you can learn more about how to apply cybersecurity best
practices.
PTZ
Shows the PTZ status.
Test: Click to test the PTZ mechanics. During the test, there are no video streams available. When the test is done, the device
restores its home position.
Connected clients
View details: Click to show all clients that are connected to the device.
Ongoing recordings
Recordings: Shows each ongoing recording and its source. For more information, see Recordings on page 29
Shows the storage space where the recording is saved.
Power status
Shows power status information, including current power, average power and max power.
Power settings: Click to go to the Power settings page where you can change the power settings.

Video

Click-and-drag the crosshair to pan and tilt in the live view.
Zoom Use the slider to zoom in and out.
Focus Use this setting to set focus in the shown area. Depending on the device, different focus modes are available.
• Auto: The camera automatically adjusts focus based on the entire image.
• Manual: Set the focus manually at a fixed distance.
• Area: The camera automatically adjusts focus for a selected area of the image.
• Spot: The camera automatically adjusts focus for the center of the image.
Brightness Use this setting to adjust the light intensity in the image, for example, to make objects easier to see. Brightness is
applied after image capture, and does not affect the information in the image. To get more details in a dark area, it is sometimes
better to try to increase gain or increase exposure time.
15