Buttons; Connectors - Axis Q6315-LE User Manual

AXIS Q6315-LE PTZ Camera
Specifications
For SD card recommendations, see axis.com.
SD, SDHC, and SDXC Logos are trademarks of SD-3C LLC. SD, SDHC and SDXC are trademarks or registered
trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button
The control button is used for:
• Resetting the product to factory default settings. See Reset to factory default settings on page 57.
Power button
The power button is used with the control button to reset the camera to factory default settings. See page 57.

Connectors

Network connector
RJ45 Push-pull Connector (IP66) with High Power over Ethernet (High PoE).
NOTICE TICE
NO NO TICE
To comply with the IP66-rated design of the camera and maintain the IP66 protection, the supplied RJ45 Push-pull Connector
(IP66) shall be used. Alternatively, use the RJ45 IP66-rated cable with premounted connector which is available from your
Axis reseller. Do not remove the plastic network connector shield from the camera.
55