Warning: Before proceeding, be sure to shut off electricity
at main switch or circuit breaker in order to avoid electrical
shock.
Note: Before installing the wall transmitter, place it in OFF
position. (Fig.2)
Make series-wound connection for the wall controller with
HOT wire from house and lead wires from fan.
Connect the black wire marked "AC IN L" from wall controller
to the HOT wire from house and then connect the black wire
marked "TO MOTOR L" of wall controller to the fan lead wire
from fan in outlet box.
Connect green/yellow grounded wire to grounded wire from
outlet box.
Install the wall controller to outlet box using machine screws
provided.
Attach wall plate to wall control unit with screws provided.
(Fig.1)
Operation
This wall controller provides 4 fan
speeds.(Fig.2)
1 - High - , 2 - Medium high , 3 -
Medium , 4 - Low , - Off.
© 2020 Monte Carlo Fan Collections
Wall controller
Wall plate
4
3
2
1
6
WHITE (Neutral)
120V/60HZ
Power supply
BLACK (Live)
Black(AC IN L)
Black (TO MOTOR L)
Green/Yellow (Grounding)
OFF
Fig.2
Outlet box
Fig.1
12/2020