Table of Contents
Advertisement
1-3. Charging
When normal charging cannot be carried out
If charging does not commence even though the correct procedure
has been carried out, and an error message is shown on the multi-
information display, try the correction procedures listed in the table
below.
If you still cannot correct the problem, contact your Toyota dealer.
A problem has occurred during charging
Refer to the following table and carry out the appropriate correction
procedure.
Situation
The power indicator on
the CCID (Charging
Circuit Interrupting
Device) does not illumi-
nate even when con-
nected to a power
source
88
Reason
The plug is not properly
connected to the elec-
trical receptacle.
There is a power out-
age.
The circuit breaker has
activated.
Correction procedure
Insert the plug firmly
into the electrical
receptacle.
Restart charging once
power has been
restored.
Check the circuit
breaker. If there is
nothing unusual, con-
nect to another electri-
cal receptacle and
check that charging is
possible.
If charging is possible,
there is likely a prob-
lem with the first elec-
trical receptacle.
Contact your building
manager or an electri-
cian.
Advertisement
Table of Contents
