Table of Contents
Advertisement
5-2. Steps to take in an emergency
Messages
444
Details
Charging has been
completed and the
"POWER" switch was
turned to ON mode.
• The message will be
displayed even if charg-
ing was interrupted by a
power outage, the
charging cable being
disconnected, etc.
• This message will be
displayed in conjunction
with other messages.
The simultaneously dis-
played message will dif-
fer in accordance with
the charging status (for
example, if charging
was completed or has
been interrupted).
Charging was aborted
due to a reduction in
power from the power
source.
Correction procedure
Turn the "POWER"
switch off once and the
display will turn off.
Then turn the "POWER"
switch to ON mode.
• If a message warning of
an interruption in charg-
ing is displayed simulta-
neously, turn the
"POWER" switch off.
After approximately 6
seconds have passed,
turn the "POWER"
switch back to ON
mode.
• After the "POWER"
switch operations have
been performed, the
vehicle can be driven as
normal.
Charging has not been
properly completed.
Perform charging again
according to the instruc-
tions on page 53.
The vehicle can be
driven without perform-
ing charging again,
however, the drivable
distance will be short-
ened.
Advertisement
Table of Contents
