Table of Contents
Advertisement
■
Auto power off function
If the vehicle is left in ACCESSORY mode for more than an hour with the
shift position in P, the "POWER" switch will automatically turn off.
■
Sounds and vibrations specific to a electric vehicle
P. 30
■
Electronic key battery depletion
P. 106
■
Auto P position function
●
If the "POWER" switch is pressed while the EV system is operating and
the vehicle is at a complete stop, the "POWER" switch will be turned to
OFF, then the shift position will be automatically switched to P.
When turning the "POWER" switch to off while the shift position is not set
to P, operate the "POWER" switch while pushing down fully on the brake
pedal. Then, release the brake pedal after confirming that the shift posi-
tion indicator on the instrument cluster shows P.
●
If the auto P position function is malfunctioning, it may not be possible to
turn the "POWER" switch to off. In this event, the "POWER" switch can
be turned to off after applying the parking brake.
Have the vehicle inspected by your Toyota dealer immediately.
■
When the ambient temperature is low, such as during winter driving
conditions
Driving power may be limited due to traction battery temperature being low.
Follow the instructions on the meter display. If the vehicle has been parked
for a long time in low ambient temperatures, it may be necessary to plug in
the vehicle to warm-up and charge the traction battery before driving.
■
When the P position control system malfunctions
The "POWER" switch will not be able to be turned off. In such a case, the
switch can be turned off after applying the parking brake.
Have the vehicle inspected by your Toyota dealer immediately.
■
Conditions affecting operation
P. 104
■
Note for the entry function
P. 105
2-1. Driving procedures
2
203
Advertisement
Table of Contents
