Table of Contents
Advertisement
Charging and pre-climate messages
Charging messages are shown on the multi-information display
when: the traction battery is being charged using the charging cable,
the driver's door is opened, and the "POWER" switch is turned to ON
mode after charging has been completed (when both charging indica-
tor lights illuminate).
If one of the messages is displayed, follow the correction procedures.
Messages
Details
The charging cable has
been connected to the
vehicle while the
"READY" indicator light
was illuminated.
A buzzer also sounds.
An attempt has been
made to start the EV
system while the charg-
ing cable was con-
nected.
A buzzer also sounds.
An attempt to start
charging while the
"POWER" switch is in
ON mode was made.
5-2. Steps to take in an emergency
Correction procedure
A safety function* oper-
ates and automatically
turns off the EV system.
Turn the "POWER"
switch off, and perform
charging according to
the instructions on page
91.
A safety function* oper-
ates, not allowing the
EV system to be started
while the charging cable
is connected.
Remove the charging
cable and start the EV
system.
Charging has not been
properly completed.
Perform charging again
according to the instruc-
tions on page 53.
The vehicle can be
driven without perform-
ing charging again,
however, the drivable
distance will be short-
ened.
5
443
Advertisement
Table of Contents
