Plugging in the charging cable
STEP
1
Prepare the charging cable
STEP
2
*
Insert the charging cable's plug
into the electrical receptacle of
the external power source.
Make sure that the standards of
the
electrical
charging cable's plug match.
(P. 50)
Check that the power indicator of
the CCID (Charging Circuit Inter-
rupting Device) is illuminated. (If it
does not illuminate, refer to the
text on page 88.)
To reduce the burden on the elec-
trical receptacle and charging
cable plug, Toyota recommends
hanging the CCID (Charging Cir-
cuit Interrupting Device) on a
hook or similar.
When charging outdoors, make
sure to use a "while-in-use" cover
as shown in the illustration.
*: "While-in-use" cover.
1-3. Charging
receptacle
and
59
1