Table of Contents
Advertisement
3-4. Other interior features
Operating HomeLink
Press the appropriate HomeLink
light should come on.
The HomeLink
a signal for up to 20 seconds as long as the button is pressed.
Reprogramming a HomeLink
Press and hold the desired HomeLink
HomeLink
indicator light will start flashing slowly. Keep pressing the
HomeLink
button and press and hold the transmitter button until the
HomeLink
indicator light changes from a slow to a rapid flash.
Release the buttons.
Erasing the entire HomeLink
324
®
compatible transceiver in your vehicle continues to send
®
®
button. The HomeLink
button
button. After 20 seconds, the
memory (all three programs)
Press and hold the 2 outside but-
tons for 10 seconds until the indi-
cator light flashes.
If you sell your vehicle, be sure to
erase the programs stored in the
HomeLink
indicator
memory.
Advertisement
Table of Contents
