QTek 8100 User Manual page 99

NOTE: Before configuring E-mail on your phone, you must
have an Internet and E-mail account. You will also need
to configure your device's data connection, as described
in Chapter 5.
5. In E-mail address, enter the address for this account.
Leave the Automatic setup box checked to obtain E-mail
setting from the Internet. The phone will make an Internet
connection and attempt to determine the server settings
for E-mail.
6. In User name, enter your user name. This is usually the
first part of your E-mail address, which appears before the
"at" sign (@).
7. In Password, enter your password.
8. In Domain, enter the domain name, if required.
9. To save your password, so that you do not need to enter it
each time you connect to your E-mail server, select Save
password > Next.
NOTE: If you save your password and then lose your phone,
your E-mail could be accessed by someone else.
10.In Server type, scroll to select the type of E-mail server
that hosts your mailbox (IMAP4 or POP3) and select Next.
In Account name, enter a name for this account. You
must use a different name for each account that you set
up.
11. In Network, scroll to the type of network that your E-mail
server runs on and select Next.
12.Enter information about your E-mail servers and select
Next. If you are not sure what to enter, ask your network
administrator.
13.Select message download options and select Next.
14.Select a connection option, select Next > Finish.
Smartphone User Manual
99