Modem Link - QTek 8100 User Manual

Smartphone User Manual
96

5.4 Modem Link

Using Modem Link, you can use your phone as an external
modem for another device or computer by using an infrared,
bluetooth, or USB connection.
To set up an infrared, USB, or Bluetooth connection:
1.
2.
3.
4.
5.
NOTE: In order for the Bluetooth option to be available in
the Connection field in Step 3 above, you need to set Blue-
tooth to Discoverable mode as described earlier in Section
5.3. You also need to enable Bluetooth Modem capability
on your desktop/laptop PC (Start menu > Settings > Net-
work and Dial-up Connections). In addition, when creating
a new modem on your desktop/laptop PC, you must enter this
Extra Initialization command in the Properties > Advanced
tab: AT+CGDCONT=1,"IP","APN field","",0,0. (In this
command, the value you insert in the APN field position
depends on your operator.)
For details about setting up Modem Link with a desktop PC
or laptop PC, please refer to the separate User's Manual
for Modem Link.
Deactivating:
To deactivate the Modem Link at any time, select Deactivate
from the menu in Step 4 above. (Failing to deactivate the
modem link when you are finished using it might result in
problems with using ActiveSync in the same session.)
Ensure that your phone is not connected to another
device.
Select Accessories > Modem Link from the Start
menu.
In the Connection field, select USB, IrCOMM, or
Bluetooth. The default Baud Rate is set at 115,200.
Press the Right Softkey to open the menu in the Modem
Link screen, then select Activate from the menu.
Press the Left Softkey ("Done").